应用视频 | 示波器 -九游官网下载

oscilloscopes – designed for you. not for the hype

affordable digital oscilloscopes with outstanding features. wowee, are we right?

embedding & equalization with the r&s rtp oscilloscope (part 1)

learn about key advantages of the embedding and equalization option of the r&s rtp & rto6 oscilloscopes. start with the signal configurator.

embedding & equalization with the r&s rtp oscilloscope (part 2)

learn how easy it is to configure a cable emulation within the embedding setup dialog. for interface standards such as usb, necessary s-parameter files are included in the oscilloscope software.

embedding & equalization with the r&s rtp oscilloscope (part 3)

the eye diagram is an effective tool to validate signal integrity. this video compares the eye diagram on a signal acquired at the output of a usb transmitter versus a waveform with some added cable emulation.

embedding & equalization with the r&s rtp oscilloscope (part 4)

learn how easy it is to configure a equalizer emulation within the equalizer setup dialog. for interface standards such as usb, pcie or dp, the necessary s-parameter files are included in the oscilloscope software.

rtp oscilloscopes with external frontends (part 1)

the r&s fe external frontends extend the frequency range of the rtp oscilloscope up to 170 ghz. no additional equipment is needed for this compact and fully calibrated solution. learn how easy it is to configure a external frontend directly by the rtp gui.

rtp oscilloscopes with external frontends (part 2 )

the r&s rtp oscilloscope offers a comprehensive set of tools for analysing widebad rf signals together with the external frontends downconverted. start with powerful trigger events, responsive spectrum analysis or the unique iq mode to prepare in depth signal analysis. .

rtp oscilloscopes with external frontends (part 3 )

the r&s vse software offer a comprehensive set of analysis options for rf signal analysis. this video demonstrates how easy the vse software can analyze a 5g fr2 signal that was captured and downconverted by the fe44s external frontend and acquired by the rtp oscilloscope.

rtp oscilloscopes with external frontends (part 4 )

the rtp oscilloscope can use up to 4 external frontends to acquire the respective if signals for further analysis. here we use two fe44s external frontends to test a 5g fr2 signal at 28 ghz. signal analysis is performed by the r&s vse software running directly on the rtp oscilloscope.

rtp oscilloscopes with external frontends (part 5 )

use the r&s rtp oscilloscope with the r&s external frontend fe110sr to debug your automotive radar devices. this example demonstrates the analysis of a bursted radar chirp signal with the fft and spectrogram. analysis with the r&s vse software and the transient option enhances the characterization of radar signals. additionally, the acquisition of two fe110sr signals with a maximum bandwith of 10 ghz in a frequency range of 70 to 110 ghz is possible the rtp oscilloscope.

pam-n analysis with the r&s rtp oscilloscope (part 1)

learn about key advantages of the pam-n analysis option on the r&s rtp & rto6 oscilloscopes. start with the signal configurator.

pam-n analysis with the r&s rtp oscilloscope (part 2)

learn about key advantages of the pam-n analysis option on the r&s rtp & rto6 oscilloscopes. in combination with the cdr option, obtain the fastest eye diagrams to characterize signal behaviour in seconds.

pam-n analysis with the r&s rtp oscilloscope (part 3)

learn about key advantages of the pam-n analysis option on the r&s rtp & rto6 oscilloscopes. in combination with the cdr option, obtain the fastest eye diagrams to characterize signal behaviour in seconds.

o-ru energy efficiency testing

watch this video and discover how the r&s ngp power supply units power the radio unit and monitor voltage and current statistics over time.

towards 6g: mimo measurements up to 110 ghz

this video demonstrates signal transmission and analysis of a 2x2 mimo signal at 90 ghz.

isolate signal details with precise digital trigger. see the difference

rtp oscilloscopes can trigger on signals as small as 1/1000th of a vertical division thanks to digital triggering and adjustable hysteresis.

automated measurements. rtp - see the difference

the rtp offers of more than 90 automated measurements, with statistical analysis and histogram and track display for data visualization. learn to use it most easily.

serial bus decoding. rtp - see the difference

the 16 digital channels of the mso option extend the measurement resources of the rtp. use them for protocol-based triggering and decoding of low-speed interfaces such as i2c, spi, mil1553 or mipi rffe.

accelerate your emi debugging. rtp - see the difference

see on our debugging example how to use the powerful spectrum analysis with log display, peak list and limit lines for visualizing and evaluating the emi emission.

trigger on zones in real-time. rtp - see the difference

the rtp's zone trigger allowes as the only oscilloscope in the world to isolate events in the time and the frequency domain.

powerful spectrum and spectrogram. rtp - see the difference

use the accuracy of the rtp for the analysis of wide-band rf signals.

differential signal math in real-time. rtp - see the difference

benefit from differential and common mode signals beeing calculated in real-time.

compensate signal losses in real-time. rtp - see the difference

compensate signal losses from test fixtures or cables in real-time.

superior user experience. rtp - see the difference

learn how easy it is to organize your waveforms and results with the rtp oscilloscope.

quickly access your favourite tools. rtp - see the difference

access your favourite scope functions most quickly via the toolbar.

how does high update rate help? rtp - see the difference

benefits from the rtp oscillscopes, offering the fastest update rate of maximum 750,000 waveforms/s.

meet the r&s rtp oscillscope

the r&s rtp is the most versatile multi-purpose oscilloscope.

相位相参多通道脉冲分析

可扩展且易于配置的雷达/电子战系统九游官网下载的解决方案，能够准确执行多个脉冲信号的相位相参分析。

示波器可通过适当设置解码 i²c

以 r&s®rto 为例了解如何通过适当设置轻松解码 i²c。

通过 rto 硬件触发调试 i²c

如何通过硬件触发和历史模式识别并跟踪 i²c 接口错误。

调试 rs232、rs485 或 uart 接口

使用示波器解码 uart/rs232/rs485 接口！您能够迅速了解数据，并将数据内容与电信号相关联。

i²c 解码协议创造多种可能

深入了解协议以排查 i²c 接口问题。

uart/rs232/rs485 触发中断条件

通过硬件触发隔离中断条件。历史模式可用于将中断条件与相关根本原因一一关联。

深入分析 rs232 接口

使用 r&s®rto 解码表和缩放窗口逐帧深入分析 rs232 接口。

使用罗德与施瓦茨示波器进行高级抖动分析

基于信号模型的创新抖动分解算法

使用罗德与施瓦茨示波器进行时域反射 (tdr)/时域传输 (tdt) 分析

阻抗和传输损耗测量

用于射频信号分析的 i/q 模式

通过下变频转换示波器的射频信号，并借助 r&s®vse 软件或外部工具使用获得的 iq 样本进行进一步分析。

针对积分数学波形的高级校正功能

了解如何使用高级数学运算功能消除积分数学波形中的 1/f 噪声，以便分析正弦或脉冲信号。

脉冲信号能量测量

了解如何使用高级数学运算功能测量脉冲正弦波信号的能量。

77 ghz 汽车电子雷达（第 1 部分）

详细了解汽车电子雷达设备的基本测试装置，包括 rtp 高性能示波器。

77 ghz 汽车电子雷达（第 2 部分）

针对变频器和其他装置组件实时去嵌。

77 ghz 汽车电子雷达（第 3 部分）

使用内置示波器功能解调雷达脉冲。

77 ghz 汽车电子雷达（第 4 部分）

针对多个天线信号执行相位相参测量。

校园仪表板 – 设置和配置

了解如何为大规模学生实验室设置和配置软件

校园仪表板 – 关键功能

详细了解罗德与施瓦茨校园仪表板软件的关键功能。

校园仪表板 – 简介

大规模学生实验室的高效教学软件

分布式系统的电源完整性

本场讲座深入探讨了系统级问题，并提供有效的测量和分析技术，以实现具有竞争力的最佳系统性能。

clock and lo components in 5g base stations (part 2/3)

learn how to verify the performance of rf sampling clock generator / jitter attenuator with low noise signal generator and high-performance oscilloscope.

使用手持式示波器解码 sent 总线

了解如何使用 r&s®rth 手持式示波器轻松解码 sent 总线。

使用示波器解码 flexray

了解如何使用 r&s®rto 轻松解码 flexray。

借助深存储和超分段存储性能解码超过三分钟的总线数据

以 r&s®rta 为例了解如何借助深存储和超分段存储性能解码总线数据。

探测具有显著共模的差分总线

以连接到差分 can 总线的 r&s®rta 为例，了解探测差分总线的最佳方法。

使用示波器调试 can 接口

以 r&s®rto 为例了解如何调试 can 接口。

can-dbc：can 总线符号解码

以 r&s®rto 为例了解如何将已解码的十六进制值转换成易于辨识的文字。

使用手持式示波器解码 can flexible data (can-fd) 总线

了解如何使用 r&s®rth 手持式示波器轻松解码 can-fd 总线。

结合频域触发和区域触发以捕获突发信号

了解如何使用 r&s®rto 轻松捕获遥控器的射频突发信号。

示波器的串行总线解码功能

以 r&s®rto 为例了解罗德与施瓦茨示波器强大的解码功能

触发和解码 sent 总线的快速通道和慢速通道

以 r&s®rto 为例了解如何解码 sent，包括增强型串行消息。

使用示波器解码 lin

以 r&s®rta 为例了解如何解码 lin。

使用示波器调试 can flexible data (can-fd) 接口

以 r&s®rto 为例了解如何调试 can-fd。

使用适当的网格注释功能进行电流探头测量

了解如何使用适当的 r&s®rto 网格注释功能轻松进行电流探头测量。

解码 can 总线

了解如何使用 r&s®rto 解码 can 总线，以及查看传输误差和电信号质量。

使用手持式示波器解码 can 总线

了解如何使用 r&s®rth 手持式示波器轻松解码 can 总线。

使用示波器进行 emi 调试

以 r&s®rto 为例了解如何使用近场探头和选通 fft 调试电源。

解码 sent 总线信号

以 r&s®rto 为例了解如何使用罗德与施瓦茨示波器轻松解码 sent 总线。

sent 总线的符号解码

以 r&s®rto 为例，了解如何设置 sent 总线的符号解码。

使用内置码型发生器激励设备

了解如何使用 r&s®rta 的内置码型发生器激励被测设备。

触发 can 总线

以 r&s®rto 或 r&s®rtm 为例了解罗德与施瓦茨示波器的总线触发功能。

示波器的串行总线解码功能

以 r&s®rtm 为例了解罗德与施瓦茨示波器强大的解码功能。

解码 can 总线

了解如何使用 r&s®rtm 解码 can 总线，以及查看传输误差和电信号质量。

解码 can flexible data (can-fd) 总线

了解如何使用 r&s®rto 解码 can-fd，以及查看传输误差和电信号质量。

借助深存储性能解码超过一分钟的总线数据

以 r&s®rto 为例了解具有深存储的罗德与施瓦茨示波器如何记录超过一分钟的 can 总线数据。

根据 open 联盟 tc9 规范进行 1000base-t1 电缆测试

根据 open 联盟 tc9 规范的 1000base-t1 非屏蔽双绞线 (utp) 电缆测试指南。

集成式任意波形发生器

每台 r&s®rto 均可以升级以配备 100 mhz 任意波形发生器。

首款同时支持时域和频域的区域触发功能

r&s®rto 示波器的区域触发能够以图形方式隔离事件。

高达 16 位垂直分辨率

低噪声前端和 10 ghz 单核模数转换器是 r&s®rto 示波器具备优越的测量准确度和动态范围的基础。

平坦的频率响应，测量结果准确无误

平坦的频率响应确保 r&s®rto 示波器能够在整个标定带宽上实现准确的信号捕获。

极低噪声实现精确测量

尽可能减小噪声是 r&s®rto 设计的主要目标。这样，即使是在最小垂直分辨率下也能进行精确测量。

强大的 100base-t1 解码

详细介绍使用 r&s®rto 示波器及 k57 选件解码 100base-t1 车载以太网。

使用罗德与施瓦茨示波器解码车载以太网和 can

对比使用 r&s®rtm 示波器解码 can 与结合使用 r&s®rto 示波器及 k57 选件解码车载以太网。